37 CFR § 1.76 — Application data sheet. (MPEP Coverage Index) – BlueIron IP
37 CFR § 1.76 Application data sheet.
This page consolidates MPEP guidance interpreting 37 CFR § 1.76, including 646 rules from the Manual of Patent Examining Procedure. It is provided as guidance, with links to the ground truth sources. This is information only, it is not legal advice.
Summary
The Application data sheet is a critical component of the patent application that must include specific information and adhere to detailed rules set forth by the USPTO, ensuring it accurately reflects the priority claim and other essential details.
What this section covers
- Defines what this section covers at a high level, including the core topic and scope of guidance in this section.
- Identifies the primary requirement practitioners must satisfy, including additional required elements or conditions.
Key obligations
- States the primary requirement practitioners must satisfy, including key compliance obligations tied to authority (USC/CFR).
- States an additional required element or condition if applicable, including key compliance obligations tied to authority (USC/CFR).
Practice notes
- Provides a practical drafting or filing tip grounded in this section, including common pitfalls and best practices.
Official MPEP § 1.76 — Application data sheet.
Source: USPTOLast Modified: 10/30/2024 08:50:22
1.76 Application data sheet.
[Editor Note: Some paragraphs have limited applicability. See * below for details.]
- (a) Application data sheet. An application data sheet is a sheet or sheets that may be submitted in a provisional application under 35 U.S.C. 111(b) , a nonprovisional application under 35 U.S.C. 111(a) , a nonprovisional international design application, or a national stage application under 35 U.S.C. 371 and must be submitted when required by § 1.55 or 1.78 to claim priority to or the benefit of a prior-filed application under 35 U.S.C. 119 , 120 , 121 , 365 , or 386 . An application data sheet must be titled “Application Data Sheet.” An application data sheet must contain all of the section headings listed in paragraph (b) of this section, except as provided in paragraph (c)(2) of this section, with any appropriate data for each section heading. If an application data sheet is provided, the application data sheet is part of the application for which it has been submitted.
- (b)
Bibliographic data. Bibliographic data as used
in paragraph (a) of this section includes:
- (1) Inventor information. This information includes the legal name, residence, and mailing address of the inventor or each joint inventor.
- (2) Correspondence information. This information includes the correspondence address, which may be indicated by reference to a customer number, to which correspondence is to be directed (see § 1.33(a) ).
- (3) Application information. This information includes the title of the invention, the total number of drawing sheets, a suggested drawing figure for publication (in a nonprovisional application), any docket number assigned to the application, the type of application ( e.g., utility, plant, design, reissue, provisional), whether the application discloses any significant part of the subject matter of an application under a secrecy order pursuant to § 5.2 of this chapter ( see § 5.2(c) ), and, for plant applications, the Latin name of the genus and species of the plant claimed, as well as the variety denomination. When information concerning the previously filed application is required under § 1.57(a), application information also includes the reference to the previously filed application, indicating that the specification and any drawings of the application are replaced by the reference to the previously filed application, and specifying the previously filed application by application number, filing date, and the intellectual property authority or country in which the previously filed application was filed.
- (4) Representative information. This information includes the registration number of each practitioner having a power of attorney in the application (preferably by reference to a customer number). Providing this information in the application data sheet does not constitute a power of attorney in the application (see § 1.32 ).
- (5) Domestic benefit information. This information includes the application number, the filing date, the status (including patent number if available), and relationship of each application for which a benefit is claimed under 35 U.S.C. 119(e) , 120 , 121 , 365(c) , or 386(c) . Providing this information in the application data sheet constitutes the specific reference required by 35 U.S.C. 119(e) or 120 and § 1.78 .
- (6) Foreign priority information. This information includes the application number, country (or intellectual property authority), and filing date of each foreign application for which priority is claimed. Providing this information in the application data sheet constitutes the claim for priority as required by 35 U.S.C. 119(b) and § 1.55 .
- (7) Applicant information: This information includes the name (either natural person or juristic entity) and address of the legal representative, assignee, person to whom the inventor is under an obligation to assign the invention, or person who otherwise shows sufficient proprietary interest in the matter who is the applicant under § 1.43 or § 1.46 . Providing assignment information in the application data sheet does not substitute for compliance with any requirement of part 3 of this chapter to have an assignment recorded by the Office.
- (c)
Correcting and updating an application data
sheet.
- (1) Information in a previously submitted application data sheet, inventor’s oath or declaration under § 1.63 , § 1.64 or § 1.67 , or otherwise of record, may be corrected or updated until payment of the issue fee by a new application data sheet providing corrected or updated information, except that inventorship changes must comply with the requirements of § 1.48 , foreign priority and domestic benefit information changes must comply with §§ 1.55 and 1.78 , and correspondence address changes are governed by § 1.33(a) .
- (2) An application data sheet providing corrected or updated information may include all of the sections listed in paragraph (b) of this section or only those sections containing changed or updated information. The application data sheet must include the section headings listed in paragraph (b) of this section for each section included in the application data sheet, and must identify the information that is being changed, with underlining for insertions, and strike-through or brackets for text removed, except that identification of information being changed is not required for an application data sheet included with an initial submission under 35 U.S.C. 371 .
- (d)
Inconsistencies between application data sheet and
other documents.
For inconsistencies between information that is supplied
by both an application data sheet under this section and other
documents:
- (1) The most recent submission will govern with respect to inconsistencies as between the information provided in an application data sheet, a designation of a correspondence address, or by the inventor’s oath or declaration, except that:
- (2) The information in the application data sheet will govern when inconsistent with the information supplied at the same time by a designation of correspondence address or the inventor’s oath or declaration. The information in the application data sheet will govern when inconsistent with the information supplied at any time in a Patent Cooperation Treaty Request Form, Patent Law Treaty Model International Request Form, Patent Law Treaty Model International Request for Recordation of Change in Name or Address Form, or Patent Law Treaty Model International Request for Recordation of Change in Applicant or Owner Form.
- (3) The Office will capture bibliographic information from the application data sheet. The Office will generally not review the inventor’s oath or declaration to determine if the bibliographic information contained therein is consistent with the bibliographic information provided in an application data sheet. Incorrect bibliographic information contained in an application data sheet may be corrected as provided in paragraph (c)(1) of this section.
- (e) Signature requirement. An application data sheet must be signed in compliance with § 1.33(b) . An unsigned application data sheet will be treated only as a transmittal letter.
- (f) Patent Law Treaty Model International Forms. The requirement in § 1.55 or § 1.78 for the presentation of a priority or benefit claim under 35 U.S.C. 119 , 120 , 121 , or 365 in an application data sheet will be satisfied by the presentation of such priority or benefit claim in the Patent Law Treaty Model International Request Form, and the requirement in § 1.57(a) for a reference to the previously filed application in an application data sheet will be satisfied by the presentation of such reference to the previously filed application in the Patent Law Treaty Model International Request Form. The requirement in § 1.46 for the presentation of the name of the applicant under 35 U.S.C. 118 in an application data sheet will be satisfied by the presentation of the name of the applicant in the Patent Law Treaty Model International Request Form, Patent Law Treaty Model International Request for Recordation of Change in Name or Address Form, or Patent Law Treaty Model International Request for Recordation of Change in Applicant or Owner Form, as applicable.
- (g) Patent Cooperation Treaty Request Form. The requirement in § 1.78 for the presentation of a benefit claim under 35 U.S.C. 119 , 120 , 121 , or 365 in an application data sheet will be satisfied in a national stage application under 35 U.S.C. 371 by the presentation of such benefit claim in the Patent Cooperation Treaty Request Form contained in the international application or the presence of such benefit claim on the front page of the publication of the international application under PCT Article 21(2). The requirement in § 1.55 or § 1.78 for the presentation of a priority or benefit claim under 35 U.S.C. 119 , 120 , 121 , or 365 in an application data sheet and the requirement in § 1.46 for the presentation of the name of the applicant under 35 U.S.C. 118 in an application data sheet will be satisfied in an application under 35 U.S.C. 111 by the presentation of such priority or benefit claim and presentation of the name of the applicant in a Patent Cooperation Treaty Request Form. If a Patent Cooperation Treaty Request Form is submitted in an application under 35 U.S.C. 111 , the Patent Cooperation Treaty Request Form must be accompanied by a clear indication that treatment of the application as an application under 35 U.S.C. 111 is desired.
[Added, 65 FR 54604, Sept. 8, 2000, effective Nov. 7, 2000; para. (b)(7) added, 65 FR 57024, Sept. 20, 2000, effective Nov. 29, 2000; paras. (a), (b)(4), (c)(2) and (d) revised, 69 FR 56481, Sept. 21, 2004, effective Oct. 21, 2004; para. (b)(5) revised, 70 FR 54259, Sept. 14, 2005, effective Sept. 14, 2005; para. (b)(5) revised, 72 FR 46716, Aug. 21, 2007 (implementation enjoined and never became effective); para. (b)(5) revised, 74 FR 52686, Oct. 14, 2009, effective Oct. 14, 2009 (to remove changes made by the final rules in 72 FR 46716 from the CFR); paras. (a), (b)(1), (b)(3), (b)(5), (b)(7), (c), and (d) revised and para. (e) added, 77 FR 48776, Aug. 14, 2012, effective Sept. 16, 2012; paras. (b)(5) and (b)(6) revised, 78 FR 11024, Feb. 14, 2013, effective Mar. 16, 2013; para. (b)(3) and (d)(2) revised, paras. (f) and (g) added, 78 FR 62368, Oct. 21, 2013, effective Dec. 18, 2013; paras. (a), (b)(5), and (b)(6) revised, 80 FR 17918, Apr. 2, 2015, effective May 13, 2015]
[ *Paragraphs (a), (b)(1), (b)(3), (b)(5), (b)(6), (b)(7), (c), (d) and (e) above include changes having limited applicability as follows:
The changes to para. 1.76(b)(3) effective Dec. 18, 2013 are applicable only to patent applications filed under 35 U.S.C. 111 on or after Dec. 18, 2013. For para. (b)(3) applicable to applications filed on or after Sept. 16, 2012 and before Dec. 18, 2013, see § 1.76 (2012‑09‑16 thru 2013‑12‑17) . For para. (b)(3) applicable to applications filed before Sept. 16, 2012, see § 1.76 (pre‑AIA) . The changes to paras. (a), (b)(1), (b)(5), (b)(6), (b)(7), (c), (d), and (e) effective Sept. 16, 2012 and/or May 13, 2015 are applicable only to patent applications filed on or after Sept. 16, 2012. For paras. (a), (b)(1), (b)(5), (b)(6), (b)(7), (c), and (d) in effect for applications filed prior to Sept. 16, 2012, see § 1.76 (pre‑AIA) .]
-
- Copies And Certificates
-
- Aia Overview
-
-
-
-
-
- App Types Provisional
- Continuing Applications
- Continuation Applications
-
- Assignment Ownership
- Assignee Rights
-
- Filing By Assignee
-
- Name Change Merger
- Certified Copies
- Correspondence Address
-
- Design Patents
- Design Application
-
-
- Duty Of Disclosure
- Disclosure Basics
- Examination Procedure
- Examiner Action
-
-
-
-
- International Design
-
-
- Ida Applicant
- Ida Contents
- Ida Title Description
-
-
- Maintenance Fee Late
- Late Payment Surcharge
-
-
- Application Identification
- Claims
-
-
-
- Patent Data Systems
- Classification Systems
- Patent Issuance
-
- Pct Amendments Article 19
- Pct Description Claims
-
-
- Pct Request
- Plant Patents
- Plant International
- Power Of Attorney
-
-
- Benefit Reference Requirement
-
-
- Ptab Contested Case
- Reissue
- Reissue Amendments
- Amendment Specification
-
-
- Reissue Ownership
- Secrecy Orders
- Signature Requirements
-
- Signature Assignee
-
-
- Unsigned Documents
-